RJ-900X series OPERATION MANUAL Safety instructions
1-7
1.4 Operation procedure labels
Handling of operation procedure label, pasting location and types are explained.
When handling the operation procedure labels, be careful about the following points. The labels contain
the matters with which the operator should be particularly careful while operating it.
1.4.1 Handling the operation procedure labels
Be careful about the following points, while handling with the operation procedure label.
• Check whether all operation procedure labels can be read. If the letters or illustrations on the
label are not clear, remove the dirt from the label.
• Use cloth, water and neutral detergent for removing dirt from the operation procedure label.
Avoid either organic solvents or gasoline.
• It is necessary to replace the labels if they are damaged, lost or illegible.
If the operation procedure labels have to be replaced, contact MUTOH local dealer.
1.4.2 Locations and types of warning labels
Pasting locations of the operation procedure labels are shown in the following figure.
No. Types of operation procedure label Reference
1
3.3 Installing ink
cartridges
5.1.1 Replacing ink
cartridges
To Next Page
Loading...
Need help?
General