RJ-900X series OPERATION MANUAL Troubleshooting
6-5
（2）For Windows 7
1. Complete installation in the step 3 of “3.7.3 Installing the Printer Driver (for USB Connection)”
.
• Select “Connect it later” in the step 14 of “3.7.3 Installing the Printer Driver (for USB
Connection)
”.
2. Connect the USB cable.
3. Turn the printer ON.
4. Displays “Devices and Printers” of “Control Panel”.
5. Right-click “RJ-900X” displayed as an unspecified device and select “Troubleshooting”.
• After problem detection, a solution is displayed.
6. Select “Apply this correction”.
To Next Page
Loading...
Need help?
General