22
Subject to modication
— Hook the MACH System housing onto its support.
■
— Disconnect the hydraulics and the electrics. Loader without
MACH System:
- Close the valve and disconnect the hydraulic couplings.
- Fit the (clean) protective caps on the male and female
couplings and stow the hoses on the loader.
■
— On the right side, pull the unlocking handle sharply downwards.
IMPORTANT: The locking indicator is in the red zone.
■
— Go back to the driving position and check that the locking
indicators on the left and right hitching frames are in the red
zone.
■
To Next Page
Loading...
