NAiS FP Series - Page 275

FPΣ
Specifications
13 - 26
Relay No. Name Description
R9060 MEWNET-W0
PLC link
transmission
assurance
relay
Unit No. 1 Turns on when Unit No. 1 is communicating properly in the
PLC link mode. Turns off when operation is stopped, when
an error is occurring, or when not in the PLC link mode.
R9061
assurance relay
Unit No. 2 Turns on when Unit No. 2 is communicating properly in the
PLC link mode. Turns off when operation is stopped, when
an error is occurring, or when not in the PLC link mode.
R9062 Unit No. 3 Turns on when Unit No. 3 is communicating properly in the
PLC link mode. Turns off when operation is stopped, when
an error is occurring, or when not in the PLC link mode.
R9063 Unit No. 4 Turns on when Unit No. 4 is communicating properly in the
PLC link mode. Turns off when operation is stopped, when
an error is occurring, or when not in the PLC link mode.
R9064 Unit No. 5 Turns on when Unit No. 5 is communicating properly in the
PLC link mode. Turns off when operation is stopped, when
an error is occurring, or when not in the PLC link mode.
R9065 Unit No. 6 Turns on when Unit No. 6 is communicating properly in the
PLC link mode. Turns off when operation is stopped, when
an error is occurring, or when not in the PLC link mode.
R9066 Unit No. 7 Turns on when Unit No. 7 is communicating properly in the
PLC link mode. Turns off when operation is stopped, when
an error is occurring, or when not in the PLC link mode.
R9067 Unit No. 8 Turns on when Unit No. 8 is communicating properly in the
PLC link mode. Turns off when operation is stopped, when
an error is occurring, or when not in the PLC link mode.
R9068 Unit No. 9 Turns on when Unit No. 9 is communicating properly in the
PLC link mode. Turns off when operation is stopped, when
an error is occurring, or when not in the PLC link mode.
R9069 Unit No. 10 Turnson when Unit No. 10 is communicating properly in the
PLC link mode. Turns off when operation is stopped, when
an error is occurring, or when not in the PLC link mode.
R906A Unit No. 11 Turns on when Unit No. 11 is communicating properly in the
PLC link mode. Turns off when operation is stopped, when
an error is occurring, or when not in the PLC link mode.
R906B Unit No. 12 Turnson when Unit No. 12 is communicating properly in the
PLC link mode. Turns off when operation is stopped, when
an error is occurring, or when not in the PLC link mode.
R906C Unit No. 13 Turnson when Unit No. 13 is communicating properly in the
PLC link mode. Turns off when operation is stopped, when
an error is occurring, or when not in the PLC link mode.
R906D Unit No. 14 Turnson when Unit No. 14 is communicating properly in the
PLC link mode. Turns off when operation is stopped, when
an error is occurring, or when not in the PLC link mode.
R906E Unit No. 15 Turnson when Unit No. 15 is communicating properly in the
PLC link mode. Turns off when operation is stopped, when
an error is occurring, or when not in the PLC link mode.
R906F Unit No. 16 Turnson when Unit No. 16 is communicating properly in the
PLC link mode. Turns off when operation is stopped, when
an error is occurring, or when not in the PLC link mode.