10
1
Check the keypad. The green STATUS light must be ON-STEADY, and the LCD window will read
"SYSTEM READY", indicating that the system is ready to arm.
• If the green light is off, “ZONES FAULTED” will display in the window followed by the number and
description of each faulted zone. Note each problem zone and secure it by closing a window, door,
etc. When all zones are secure, the green STATUS light will turn on and the LCD window will display
“SYSTEM READY”. If you cannot immediately secure the zones, they may be bypassed (see page 14).
2
Enter your code and press P*.
The keypad will voice prompt the correct action.
3
Open the door, exit and close the door, with others remaining
home.
4
After the exit delay time period, the entry doors are protected and will initiate the entry delay
sequence if opened.
To disarm, see page 18.
If you are arming and leaving with other family members remaining home:
The LCD window will read "ARMING STAY" during the exit delay time period. The remaining exit
delay time (in seconds) is also displayed.
*If Easy Arm feature is enabled, there is no need to enter your code--just press and hold the P button.
ARMING STAY: LEAVING WITH OTHERS STAYING
SYSTEM READY
"System is arming
in Stay mode.
If leaving, please
exit now."
To Next Page
Loading...
Need help?
General
