NAPCO GEM-K1VPS - Already Armed Stay: Leaving Without Others Staying

13
ALREADY ARMED STAY: LEAVING WITHOUT OTHERS STAYING
If the system is armed in Stay mode and you are leaving with NO other family members remaining home:
(If other family members are remaining home, see page 11).
1
The system is already armed in Stay mode.
2
Disarm the system by entering your code and pressing
U.
3
Enter your code and press Q*.
The keypad will voice prompt the correct action.
Note: If you enter a wrong User Code, the keypad will beep
4
Open the door, exit and close the door. The exit delay period, during which you can safely exit the
premises, is 60 seconds in length by default, but can be changed by your installer if desired.
READY
ARMED STAY
"System is arming
in Away mode,
please exit now."