11
If the system is armed in Stay mode and you are leaving with other family members remaining home:
(If NO other family members are remaining home, see page 13).
1
The system is already armed in Stay mode.
3
Enter your code and press P
*.
The keypad will voice prompt the correct action.
The LCD window will read "ARMING STAY" during the exit delay time period. The remaining exit
delay time (in seconds) is also displayed.
4
Open the door, exit and close the door. The exit delay period, during which you can safely exit
the premises, is 60 seconds in length by default, but can be changed by your installer if desired.
5
After the exit delay time period, the entry doors are protected and will initiate the entry delay
sequence if opened.
To disarm, see page 18.
2
Disarm the system by entering your code and pressing
U.
*If Easy Arm feature is enabled, there is no need to enter your code--just press and hold the P button.
READY
ALREADY ARMED STAY: LEAVING WITH OTHERS STAYING
ARMED STAY
"System is arming
in Stay mode.
If leaving, please
exit now."
To Next Page
Loading...
Need help?
General
