35
KEYPAD MESSAGES
The keypad can display the following functional messages. Other diagnostic messages are available for the installer
or servicer. Should any unfamiliar messages appear, call your dealer for service.
All zones operating; system can be armed. If displayed, “C” denotes Chime Mode on.
(Note: This message may have been customized by your installer).
Exit delay in progress. XXX denotes exit time remaining, in seconds. If displayed, “S”
indicates Service Code active; "I" indicates arming with Instant protection.
Entry delay in progress. XXX shows entry time remaining, in seconds.
Zones not secured (doors or windows may be open). Faulted zone(s) will scroll.
Arming attempted with faulted zone. The display will scroll the zone faults. Secure the
zone(s) and arm system.
(With pulsing sounder). Trouble condition on a Day Zone (followed by one or more zone
descriptions). Press the C button to silence sounder.
SYSTEM READY C
(DATE) (TIME)
PLEASE EXIT IN
XXX SECONDS
DISARM NOW
XXX SECONDS
ZONE FAULTED
CAN'T ARM SYSTEM
ZONE FAULTED
*DAY ZONE TRBL*
To Next Page
Loading...
