7
ARMING AWAY: ARMING WHEN LEAVING
If you are leaving with no other family members remaining home:
1
Check the keypad. The green STATUS light must be ON-STEADY, and the LCD window will read
"SYSTEM READY", indicating that the system is ready to arm.
• If the green light is off, "ZONES FAULTED" will display in the window followed by the number and
description of each faulted zone. Note each problem zone and secure it by closing a window, door,
etc. When all zones are secure, the green STATUS light will turn on and the LCD window will
display "SYSTEM READY". If you cannot immediately secure the zones, they may be bypassed (see
page 14).
2
Enter your code and press Q*.
The keypad will voice prompt the correct action.
Note: If you enter a wrong User Code, the keypad will
beep and display "INVALID ENTRY, TRY AGAIN".
3
Open the door, exit and close the door. The exit delay period, during which you can safely exit the
premises, is 60 seconds in length by default, but can be changed by your installer if desired.
SYSTEM READY
"System is arming
in Away mode,
please exit now."
*If Easy Arm feature is enabled, there is no need to enter your code--just press and hold the Q button.
To Next Page
Loading...
Need help?
General
