42
SYSTEM TROUBLE ERROR CODES
Trouble
Indication
System Trouble
Condition
Action
E04-NN
Wireless Transmitter
Supervisory Failure
A problem has been detected with a wireless transmitter. Call installing company for service
E05-NN
Wireless Transmitter
Low Battery
The battery in a wireless transmitter is low and should be replaced. This transmitter is on the
zone corresponding to the number NN. For all transmitters such as the GEM-TRANS2 door/
window transmitter, GEM-PIR motion detector, GEM-GB glass break detector, GEM-SMK or the
GEM-DT Dual Technology Sensor, refer to the markings on the device or the device documen-
tation for battery replacement instructions and information regarding the exact battery types
specified. Warning: Replace batteries only with the same type as specified either in the device
documentation or by the markings on the device. Use of another battery may present a risk of
fire or explosion. Never recharge or disassemble battery, or dispose of in fire.
E06-NN
Receiver Response
Failure
Call installing company for service.
E07-00
Download Failure Call installing company for service.
E08-00
Telephone Line Cut The telephone line has failed. If telephone service has been temporarily interrupted, the trouble
will clear automatically when it is restored. Otherwise, call installing company for service.
E09-00
System Cold Start
To Next Page
Loading...
Need help?
General
