Use the following table to determine if a previously designed RMC is compatible with the new
RMC pinout and as guidance on how to design an RMC for compatibility with future
generations of the RMC.
Table 17. RMC Connector Feature Set Compatibility
Feature Set sbRIO-9605/06/23/26 sbRIO-9607 Future Design
Compatibility
DIO[0..63] Yes Yes Yes
DIO[64..95] Yes Yes Not guaranteed
FPGA_CONF Yes Yes Yes
USB_D+/- Yes Yes Yes
RST# Yes Yes Yes
SYS_RST# Yes Yes Yes
5V Yes Yes Yes
3.3V_AUX Yes Yes Yes
FPGA_VIO Yes Yes Yes
PROC_VIO Yes No
1
Not guaranteed
VBAT Yes Yes Yes
GP_PORT
CAN
RS-232
RS-485
Secondary Ethernet
SDHC
Yes No Not guaranteed
Processor I/O via DIO[0..95]
CAN
RS-232
RS-485
SDHC
No Yes Not guaranteed
1
Pin 42 - RESERVED of the RMC connector provides 3.3 V to the RMC in order to maintain
compatibility with the sbRIO-9605/06/23/26 RMC pinout. This pin is not recommended for use
with new designs.
NI sbRIO-9607 User Manual | © National Instruments | 35
To Next Page
Loading...
Need help?
General
