To Next Page

To Previous Page

36–KOMPLETEAUDIO6–Manual

4. Starttheplaybackofanaudioleonyourcomputer.

5. GraduallyturntheVolumeControlknob(MAINVOLUME1/2)ontopoftheKOMPLETE

AUDIO6totherightuntilyoureachagoodlisteninglevel.

7.1.2 UsingKOMPLETEAUDIO6inaSetupwithPassiveSpeakers

MakesuretheKOMPLETEAUDIO6isconnectedtoyourcomputerasdescribedduringthe

installationchapter(chapter3),andconguredasyourcomputer’smainaudiooutputdevice

(seechapter4).

Passivespeakersrequireamplication,sotherewillbeamixerorstereoamplierbetween

thespeakersandtheKOMPLETEAUDIO6.TousetheKOMPLETEAUDIO6inasetupwith

passivespeakers:

1. Turnyourstereoamplier/mixeroff.

2. Connectthemainoutputs(MAIN1/2)ontherearpaneloftheKOMPLETEAUDIO6

toapairoflineinputsonyourstereoamplier/mixerwithstereo1/4”toRCA(phono)

cablesorsuitableadapters.ConnecttheLoutputchanneltotheleftlineinputchan-

nel,andtheRoutputchanneltotherightlineinputchannelofyourstereoamplier/

mixer.

3. Turnyourstereoamplier/mixeron.

4. TurntheVolumeControlknob(MAINVOLUME1/2)onthetoppaneloftheKOMPLETE

AUDIO6totheright-endstoptosettheoutputtoitsmaximumlevel.

5. Starttheplaybackofanaudioleonyourcomputer.

6. Graduallyraiseyourstereoamplier’s/mixer’svolumecontrolleveluntilyoureacha

good listening level.

7.2 ConnectingHeadphones

7.2KOMPLETEAUDIO6setupwithheadphones.

Make suretheKOMPLETEAUDIO6isconnectedtoyourcomputerasdescribedduringthe

installationchapter(chapter3),andconguredasyourcomputer’smainaudiooutputdevice

(seechapter4).

TouseheadphoneswithyourKOMPLETEAUDIO6:

Native Instruments Komplete Audio 6 Instruction Manual

Other manuals for Native Instruments Komplete Audio 6