Native Instruments Komplete Audio 6 - Digital I;O and S;PDIF Explained

46–KOMPLETEAUDIO6–Manual
2. AttachaMIDIcable.OneendgoestoyourMIDIcontroller’sMIDIOutport,theother
endtotheMIDIINportoftheKOMPLETEAUDIO6.
3. Ifyouarecontrollinganexternalsynth:attachaMIDIcable,oneendtoyourSynth’s
MIDIINport,theothertotheMIDIOUTportoftheKOMPLETEAUDIO6.
4. OpentheaudioandMIDIsettingsdialogofyourdigitalaudioworkstationsoftwareand
activatetheMIDIinputandtheMIDIoutputchannelofyourKOMPLETEAUDIO6.For
informationonwheretondtherelevantdialogandhowtoapplythesettings,please
refertothedocumentationofyourdigitalaudioworkstationsoftware.
5. GraduallyturntheVolumeControlknob(MAINVOLUME1/2)ontopoftheKOMPLETE
AUDIO6totherightuntilyoureachagoodlisteninglevel.

Todevelopthissetupfurther,youcouldnowconnectthesynth’saudiooutputtotheKOM-
PLETEAUDIO6andrecordthesynthesizerwithyourdigitalaudioworkstation.