Page 26
Working on this product will require basic and/or sometimes specialty tools based on the type of service that
will be performed at any time. To assist, we recommend having the tools listed available when performing
maintenance.
Tool
Socket Set, SAE Screwdriver Set, Phillips
Socket Set, Metric Screwdriver Set, Flat
Socket driver Tape Measure
Open end wrenches, SAE Ball-peen Hammer
Open end wrenches, Metric Rubber Mallet
Hex Bit Socket Set, SAE Motorcycle straps, adjustable
Hex Bit Socket Set, Metric Loctite 680
Adjustable Wrench
Snap Ring Pliers
Torque Wrench
MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well
as keeping the product in safe operating condition. Failure to conduct preventative maintenance by the owner
may cause the product to operate in an unsafe manner. Equipment needs to be inspected and maintained at
regular intervals per the preventative maintenance schedule provided in this manual.
MAINTENANCE
To Next Page
Loading...
Need help?
General
