NavigateWorx NR500 Series - Page 36

Industrial Cellular VPN Router NR500 Series User Manual
Page 35 / 78
Ethernet->Port Settings
• Port
Indicate the current configurate port.
• Interface
Select belong subnet for current configurate port.
NR500 also support WAN connection type set to Static IP and PPPoE mode.
Ethernet->WAN
• Connection Type
If you select DHCP Client, external DHCP server will assign an IP address to this unit.
• NAT Enable
Enable or Disable NAT (Network Address Translation).
• MTU
Maximum Transmission Unit, maximum packet size allowed to be transmitted. Should be left as
default value of 1500 in most cases.
• Override Primary DNS
Enter the primary DNS server will override the automatically obtained DNS.
• Override Secondary DNS
Enter the secondary DNS server will override the automatically obtained DNS.