NavigateWorx NR500 Series User Manual

Industrial Cellular VPN Router NR500 Series User Manual
Page 60 / 78
VPN->OpenVPN->Advanced Settings
• Enable NAT
Check this box to enable NAT, the source IP of host behind router will be disguised before accessing
the remote end.
• Enable PKCS#12
It is an exchange of digital certificate encryption standard, used to describe personal identity
information.
• Enable X.509 Attribute nsCertType
Require that peer certificate was signed with an explicit nsCertType designation of “server”.
• Enable HMAC Firewall
Add additional layer of HMAC authentication on the top of the TLS control channel to protect
against DoS attacks.
• Enable Compression LZO
Compress the data.
• Additional Configurations
Enter some other options of OpenVPN in this field. Each expression can be separated by a ‘;’.

NavigateWorx NR500 Series Specifications

General

Brand	NavigateWorx
Model	NR500 Series
Category	Network Router
Language	English