NEC Aspire Handbook

You can store the Caller ID data in the sys-
tem’s Abbreviated Dial Table or in one of
your One Touch keys.
1. With a keyset in an idle condition, press
the LIST Soft Key.
2. Press the CID Soft Key (Caller ID). The
display shows:
## = List Number
xx = Caller ID number
mm-dd hh:mm = incoming date/time
↑ = Preveiw List
↓ = Next List
Store = Store in List
DEL = Delete from List
3. Press the STORE Soft Key. The display
shows:
## = List Number
xx = Caller ID number
mm-dd hh:mm = incoming date/time
OneT = Store in One-Touch key
ABBc = Store in Common Abbreviated Dial
bin
ABBg = Store in Group Abbreviated Dial bin
4. Press the ABBC or ABBG Soft Key.
5. Dial the Abbreviated Dial bin in which
the number is to be stored.
If you press HOLD, the next avail-
able Abbreviated Dial bin will be used.
If all Abbreviated Dial bins are used,
the display shows “TABLE IS FULL”.
6. .
##: xxxxxxxxxxxxx
mm-dd hh:mm
OneT AbbC ABBg
##: xxxxxxxxxxxxx
mm-dd hh:mm
↑↓Store DEL
To store a Caller ID
number in an
Abbreviated Dial bin:
29
Caller ID
0893400_04.qxd 8/11/04 10:42 AM Page 29

NEC Aspire Specifications

General

VoIP Support	Yes
Auto Attendant	Yes
Caller ID	Yes
Music on Hold	Yes
Paging	Yes
Power	AC adapter
Dimensions	Varies by model
Weight	Varies by model
Networking	Ethernet