Conference lets you add additional inside and outside callers to your
conversation. With Conference, you can set up a multiple-party tele-
phone meeting without leaving the office. The system allows either
four or eight parties maximum per Conference.
In addition to Conference, there are other ways to have a telephone meet-
ing. See Voice Call Conference (page 33), Meet Me Conference (page
63), Meet Me Paging (page 65) and Tandem Trunking (page 113).
1. Place or answer call.
2. or (Conference).
3. Place the next call.
To access the outside call, either press
or dial a trunk access code. See
Outside Calls on pages 80 and 82 for
more.
If the second call to be conferenced is
ringing in, place the first call on hold,
answer the ringing call, then follow the
steps below.
4. or (Conference).
You may be able to have up to 32
callers. Repeat this step to add more
parties.
5. After adding all parties, press
again to begin the Conference.
Split (separate) the Conference calls
by pressing HOLD + 894.
1. to hang up.
You can set up a Conference with two
outside callers and then drop out of the
call - leaving the callers talking in an
Unsupervised Conference. Refer to
Tandem Trunking on page 113 for more.
To exit a Conference
(without affecting the
other parties):
To set up a
Conference:
32
Conference
0893400_04.qxd 8/11/04 10:42 AM Page 32
To Next Page
Loading...
Need help?
General
