1. + + you
want to program.
2. Dial Feature Code you want to store +
.
For example, store 2 to make a call-
back key. Refer to the features in this
handbook for the appropriate Service
Codes. Optional: Display phone users
can enter a name + HOLD.
3. to hang up.
1.
If you press a line key before pressing
a One-Touch Key for outside calling,
the system automatically removes any
stored trunk codes.
1.
Let the stored number dial out.
2. Press another .
The stored digits dial out.
1. + .
The stored function displays. Repeat
this step to check additional keys. If you
cannot see the entire number stored,
dial .
2. .
To check the function
of a One-Touch Key:
To chain the functions
of two One-Touch
Keys:
To use a One-Touch
Key:
To assign a Feature
Code to a One-Touch
Key:
80
One-Touch Calling
0893400_04.qxd 8/11/04 10:42 AM Page 80
To Next Page
Loading...
