Section 2: Components
Product Description 11
2
When installing the adapters, the keyset should Þrst be unplugged from the system. Also note that
the adapters may have an AC/DC power jack. Power is not required for all the adapters. You should
refer to the information for the speciÞc adapter to determine whether a power source is needed.
Telephones with any of these adapters installed cannot be wall-mounted. The bracket will not
accommodate the adapter(s).
1 = The IP Adapter takes the full space provided for adapters on the keysets. Therefore, if an IP adapter is
installed, no other adapters can be used.
2 = Only one adapter of the same type can be used on a keyset.
3 = As there is only one voice path provided for adapters, the APR and APA adapters can not both be used
on the same keyset.
4 = Due to protocol collision, the CTU and CTA adapters can not both be used on the same keyset.
5 = The ADA2 and PSA Adapters can only be installed on the Aspire IPhone, which only has one adapter
connection. Therefore, if either the ADA2 or PSA is installed, no other adapters can be used.
6 = As this adapter requires the AC power adapter, it can not be installed on a phone with an APR or
Speakerphone adapter, which also requires power. The placement of the AC power adapter plug will
not allow the unit installed on the left side of the phone to receive power.
Adapter Compatibility Restrictions
To Next Page
Loading...
Need help?
General
