4-50 Configuring Your Server
The Slot Number field shows a slot number to which a hard disk drive is installed. In the
example, the hard disk drive is installed in slot 2.
If you click the checkbox for [Locate], the access lamp of the hard disk drive blinks green.
Configuration Wizard
Use this wizard to configure a RAID using the HDDs. The detailed explanation of this feature is
given in "Configuring Virtual Disk".
Adapter Selection
Clicking [Adapter Selection] on WebBIOS top menu opens the [Adapter Selection] screen again.
Physical View
If the virtual disk has been configured, DG (disk group) is displayed on WebBIOS top menu.
Clicking [Physical View] displays information for HDDs in DG. Clicking [Physical View] again
displays virtual disk in DG.
Events
The Events screen is used to confirm the system events.
IMPORTANT:
The on-board RAID (LSI Logic MegaRAID SAS
PCI EXPRESS ROMB) does not support Events feature.
To Next Page
Loading...
