Installing the Operating System B-19
Optional Network Board Driver
If you want to use the optional Network Board (N8403-017/020), install the driver stored on the
NEC EXPRESSBUILDER DVD.
For Windows Server 2003, the driver is in the following directory:
"\001\win\winnt\dotnet\ns41s\pro1000\ws03xp2k"
For Windows Server 2003 x64 Editions, the driver is in the following directory:
"\001\win\winnt\w2k3amd\ns41s\pro1000\ws3xpx64"
Refer to the installation procedure described in the section "Installation of the Optional Network
Board Driver."
Installation of the Optional Network Board Driver
1.
Open [Device Manager].
2.
Click [Network adapters] and double-click [(Network Adapter Name)].
[(Network Adapter Name) Properties] appears.
NOTE:
[(Intel(R) PRO/1000...)] is the name of the onboard adapter.
All other names are for the Optional Network Board.
3.
Click the [Driver] tab and click [Update Driver...].
The [Hardware Update Wizard] appears.
4.
Select the [Install from a list or specific location (Advanced)] radio button and click
[Next].
5.
Select the [Search for the best driver in these locations] radio button and check the
[Search removable media (floppy, CD-ROM...)] check box.
6.
Check the [Include this location in the search] check box and specify:
For Windows Server 2003
" \001\win\winnt\dotnet\ns41s\pro1000\ws03xp2k"
For Windows Server 2003 x64 Editions
" \001\win\winnt\w2k3amd\ns41s\pro1000\ws3xpx64"
Then, click [Next].
7.
Click [Finish].
To Next Page
Loading...
