Installing the Operating System with Express Setup 5-9
INSTALLING WINDOWS SERVER 2003
Express Setup proceeds by selecting or inputting parameters in the wizard. You can also save the
parameters to a floppy disk as a parameters file.
1.
Turn on peripheral devices and then turn on the server.
2.
Insert the NEC EXPRESSBUILDER DVD into the optical disc drive of the server.
3.
Press the RESET switch or press
Ctrl
,
Alt
, and
Delete
to boot from the NEC
EXPRESSBUILDER DVD.
The system boots from the DVD-ROM and NEC EXPRESSBUILDER starts.
Select "OS installation *** default ***" from the boot selection menu. If you do not press
any key, "OS installation" is selected automatically.
The Top menu appears.
4.
Select [Perform the Express setup] from the Top menu and click [Next].
To Next Page
Loading...
