8-24 Troubleshooting
MAINTENANCE TOOLS
Maintenance Tools prevent and analyze system errors.
Starting Maintenance Tools
Start the Maintenance Tools according to the following procedure:
1.
Turn on the peripheral devices and then the server.
2.
Insert the NEC EXPRESSBUILDER DVD into the optical disc drive.
3.
Press Ctrl, Alt, and Delete to reboot the server.
The Boot Selection menu is displayed.
IMPORTANT:
"Os installation" is selected automatically in ten
seconds after the Boot Selection menu is displayed.
4.
When a local console is used, select "Tool menu (Normal mode)."
When a remote console is used, select "Tool menu (Redirection mode)."
IMPORTANT:
"Japanese" is selected automatically in five seconds
after the Language Selection menu is displayed.
To Next Page
Loading...
