5-28 Installing the Operating System with Express Setup
Network Monitor
A network monitor is useful for discovering the causes of network failures and determining the
necessary steps to resolve them. To use a network monitor, you need to restart the system after
installation. It is recommended to install a network monitor before a failure occurs.
1.
From the [Start] menu, click [Control Panel].
The [Control Panel] appears.
2.
Double-click [Add or Remove Programs].
The [Add or Remove Programs] dialog box appears.
3.
Click [Add/Remove Windows Component].
The [Windows Components Wizard] dialog box appears.
4.
Click [Management and Monitoring Tools] and then click [Details].
The [Management and Monitoring Tools] dialog appears.
5.
Check the [Network Monitor Tools] check box and then click [OK].
6.
The [Windows Components Wizard] dialog box appears. Click [Next].
7.
If a message is displayed asking you to insert the operating system disc, follow the
instructions on the screen and click [OK].
8.
Click [Finish] in the [Windows Component Wizard] dialog box.
9.
Close the [Add or Remove Programs] dialog box.
10.
Close the [Control Panel].
To start Network Monitor, click [Programs], click [Administrative Tools], and click [Network
Monitor]. For information on how to operate Network Monitor, refer to Online Help.
To Next Page
Loading...
