3-4 Setting Up Your Server
INSTALLING THE CPU BLADE
Install the CPU blade in a dedicated Blade Enclosure. Refer to the User's Guide of the Blade
Enclosure for how to install the CPU blade.
IMPORTANT:
The CPU blade is extremely sensitive to static
electricity. Make sure to touch the metal frame of the CPU blade to
discharge static electricity from your body before handling the CPU
blade. Do not touch the pins, leads, or circuitry or place the CPU blade
directly on a desk. For static notes, see "Anti-static Measures" in
Chapter 9.
INSTALLING THE HARD DISK DRIVE
Install a hard disk drive according to the procedure described in Chapter 9.
IMPORTANT:
The hard disk drive is extremely sensitive to static electricity. Make
sure to touch the metal frame of the CPU blade to discharge static
electricity from your body before handling the hard disk drive. Do
not touch the pins, leads, or circuitry or place the hard disk drive
directly on a desk. For static notes, see "Anti-static Measures" in
Chapter 9.
A hard disk drive may contain an operating system. Strict care must
be taken when handling it.
Handle the hard disk drive carefully to protect it from excessive
shock and vibration.
To Next Page
Loading...
