NEC BladeServer Express5800 Series - Graphics Accelerator Driver; Installing N8403-018 Fibrechannel Controller

5-22 Installing the Operating System with Express Setup
5. In [TEAM:xxx #yy Properties], the priority setting will appear in the list.
6. Click [OK].
7. In the [Intel (R) PROSet for Wired Connections] dialog box, click [OK].
8. Restart the system.
Graphics Accelerator Driver
The driver for the standard graphics accelerator will be installed automatically. The following
procedure describes how to install it manually::
1. Insert the NEC EXPRESSBUILDER DVD into the optical disc drive.
If the autorun menu appears, close the menu screen.
2. Click [Start], click [Programs], click [Accessories], and click [Windows Explorer].
3. Run "setup.exe" in the following directory:
\001\win\winnt\dotnet\video\matrox\setup.exe
4. Follow the messages to continue the installation.
If the message "Digital Signature could not been found" appears, select [Yes] to continue.
5. Remove the NEC EXPRESSBUILDER DVD from the optical disc drive and restart the
system.
Installing N8403-018 FibreChannel Controller
If you use the FibreChannel Controller (N8403-018), update your system with the NEC
EXPRESSBUILDER DVD.
The FibreChannel Controller driver will be installed automatically.