Chapter 9
Upgrading Your Server
This chapter describes optional devices available for the CPU blade, procedures to install or
removing them, and notes on their use.
IMPORTANT:
Optional devices described in this chapter may be installed or
removed by anyone. However, NEC does not assume any liability
for damage to the optional devices or the server resulting from their
installation or use. NEC recommends you ask your service
representative to install or remove any optional devices.
Make sure to use only optional devices and cables authorized by
NEC. Repair costs of the server due to damage resulting from
installation of such devices or cables will be charged even within
the warranty period.
When you make any change to the hardware configuration, make
sure to update the system (see Chapter 5 for details).
To Next Page
Loading...
