EasyManua.ls Logo

NEC BladeServer Express5800 Series - Page 143

NEC BladeServer Express5800 Series
292 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-6 Installing the Operating System with Express Setup
About the System Partition Size
The system partition size can be calculated from the following formula:
Size necessary to install the system + Paging File Size + Dump File Size
+ Application Size
Size necessary to install the system = 3500MB (Windows Server 2003 R2)
Paging File Size (Recommended) = Mounted Memory Size * 1.5
Dump File Size = Mounted Memory Size + 12MB
Application Size = Required Size
IMPORTANT:
The above paging file size is necessary for collecting the debug
information (memory dump). If a value smaller than the
“Recommended” one is set for the initial size of the paging file,
the correct debug information (memory dump) may not be
collected.
The maximum paging file size which can be set on one partition is
4095MB. If the above paging file size exceeds 4095MB, specify
4095MB for the paging file size.
The maximum dump file size for a system with more than 2GB of
memory is '2048MB + 12MB.'
If you need to install other applications, add the hard disk space
required for those applications.
For example, if the mounted memory size is 512MB, the partition size calculated by the above
formula is as follows:
3500MB + (512MB * 1.5) + (512MB + 12MB) + Application Size
= 4792MB + Application Size

Table of Contents

Related product manuals