Installing and Using Utilities 6-3
Tool menu (Normal Mode)
If you select this item, the Tool menu appears.
You can use the following maintenance functions:
– Maintenance Utility
The Maintenance Utility is usually used by the service representative (see Chapter
8).
– BIOS/FW Updating
You can update the system BIOS by using a floppy disk (prepare a 3.5" floppy disk).
– ROM-DOS Startup FD
The ROM-DOS Startup FD is used for starting the ROM-DOS system.
– Test and diagnostics
This function allows you to diagnose the server (see Chapter 7).
– System Management
You can configure the parameters of BMC (Baseboard Management Controller).
To Next Page
Loading...
