Upgrading Your Server 9-7
Installation
Install the CPU in the following procedure:
1.
Shutdown the CPU blade and turn off the power.
2.
Remove the CPU blade from the Blade Enclosure.
Refer to the User's Guide of the Blade Enclosure.
3.
Place the CPU blade on an anti-static sheet.
4.
Remove the two screws securing the top cover.
5.
Firmly hold the cover, move it slightly toward the rear of the CPU blade, and then lift the
cover to remove it.
IMPORTANT:
Handle the cover carefully so as not to make contact
with any electronic devices on the CPU blade.
To Next Page
Loading...
