Upgrading Your Server 9-29
14.
Replace the CPU unit tray.
15.
Secure the CPU unit tray with the four screws.
16.
Connect the cable to the connector for signal cable (1).
17.
Install the bracket.
IMPORTANT:
Pay attention to the cable connected in Step 16.
18.
Secure the bracket with the two screws.
19.
Connect the cables to the connectors for signal cable (2)-A and (2)-B on the CPU unit and
the storage unit.
IMPORTANT:
Be sure to connect the appropriate cables to the
connectors.
20.
Replace the top cover.
21.
Secure the top cover with the two screws.
22.
Install the CPU blade in the Blade Enclosure according to the User's Guide of the Blade
Enclosure.
To Next Page
Loading...
