Upgrading Your Server 9-31
Installation or Removal of Hard Disk Drive
Install the hard disk drive in the following procedure. Install the hard disk drive in slot 0, 1, 2, 3, 4,
and then 5 in order.
1.
Remove a dummy tray from the slot to install a hard disk drive.
IMPORTANT:
Keep the dummy tray for future use.
2.
Release the lock on the lever of the hard disk drive to open it.
3.
Hold the hard disk drive so that the BP connector faces the CPU blade and the lever on the
front of the drive carrier faces the top.
Slot 5 Slot 4 Slot 3
Slot 2 Slot 1 Slot 0
To Next Page
Loading...
