B-8 Installing the Operating System
9.
When the installation of Windows Server 2003 R2 x64 Edition finishes, the system
reboots automatically.
10.
The [Windows Setup] screen will be displayed after logging on to the system.
IMPORTANT:
The [Windows Setup] screen may not be displayed.
Be sure to install Microsoft Windows Server 2003 R2 x64 Edition
DISC 2 according to the following procedures.
You can install Microsoft Windows Server 2003 R2 x64 Edition
DISC 2 after the application of "System update." Be sure to install
Microsoft Windows Server 2003 R2 x64 Edition DISC 2. In this case,
note that the [Windows Setup] screen is not displayed.
11.
Insert the Microsoft Windows Server 2003 R2 x64 Edition DISC 2 CD-ROM into the
DVD-ROM drive.
Confirm the parameters and click [OK].
12.
When the installation finishes, remove the Microsoft Windows Server 2003 R2 x64
Edition DISC 2 CD-ROM from the DVD-ROM drive and restart the system.
After installation is complete, be sure to execute the tasks described in "Setup of Device
Driver (Normally Installed in Server)" and "Updating the System" of this chapter.
To Next Page
Loading...
