NEC BladeServer Express5800 Series - Page 273

Installing the Operating System B-15
When the system is Windows Server 2003
[When PROSet is not installed]
1. Open [Local Area Connection Properties].
1. Click [Start], click [Control Panel], click [Network Connections], and click [Local
Area Connection].
2. Click [Configure].
The properties dialog box for the network adapter appears.
3. Click the [Advanced] tab and specify [Link Speed & Duplex] values that match the hub.
4. Click [OK].
[When PROSet is installed]
1. Open [Device Manager].
2. Double-click [(Network Adapter Name)] in the list.
3. Click the [Link] tab and specify [Speed & Duplex] values that match the hub.
4. Click [OK].