B-22 Installing the Operating System
When the system is Windows Server 2003
1.
Open [Intel(R) PROSet].
Click [Start], click [Control Panel], click [Administrative Tools], and click
[Computer Management]. Double-click the [(Network Adapter Name)] in the
Network Adapter list.
2.
Select the [Teaming] tab, check [Team with other adapters], and click [New Team...].
The [New Team Wizard] dialog box appears. Click [Next]
* Specify a name for the team if necessary.
3.
Select the adapters to include in the team.
4.
Select "Adapter Fault Tolerance" or "Adaptive Load Balancing" and click [Next].
5.
Click [Finish].
6.
If it is necessary to set the adapter priority setting, refer to the following step.
If it is not necessary, go to Step 7.
1. Click the [Settings] tab in [TEAM:xxx #yy Properties].
2. Click [Modify Team].
3. Select the adapter [Intel(R)PRO/1000....]and click [Set Primary] or [Set Secondary].
4. Click [OK].
5. In [TEAM:xxx #yy Properties], the priority setting will appear in the list.
6. Click [OK].
7.
In the [Intel (R) PROSet for Wired Connections] dialog box, click [OK].
8.
Restart the system.
To Next Page
Loading...
