NEC BladeServer Express5800 Series - Page 42

General Description 2-17
On-screen message Description Action
Proc1 Vccp AlmXX
Proc2 Vccp AlmXX
BB FSBvtt Alm XX
BB DIMMvtt AlmXX
BB +1.2v Alm XX
BB +1.5v Alm XX
BB +3.3v Alm XX
BB +5v Alm XX
BB +1.2vs Alm XX
BB +1.5vs Alm XX
BB +1.25vs AlmXX
BB +3.3vs Alm XX
BB +5vs Alm XX
BB +12vs Alm XX
A voltage warning on CPU unit was
detected.
XX=07: Upper limit warning
XX=00: Lower limit warning
Replace the CPU blade.
DAS +1.2v Alm XX
DAS +1.35v AlmXX
DAS +1.5v Alm XX
DAS +1.8v Alm XX
DAS +3.3v Alm XX
DAS +5v Alm XX
DAS +1.0vp AlmXX
DAS +1.5vp AlmXX
DAS +1.5vs AlmXX
DAS +2.5vs AlmXX
DAS +3.3vs AlmXX
DAS +5vs Alm XX
DAS +12vs Alm XX
A voltage warning on storage unit
was detected.
XX=07: Upper limit warning
XX=00: Lower limit warning
Replace the CPU blade.