Configuring Your Server 4-11
Memory Configuration
Select "Memory Configuration" on the Advanced menu to display the following screen:
See the table below for the options and their descriptions:
Option Parameter Description Your Setting
Memory Size – Indicates the total capacity of installed
memory.
DIMM Group #1 -
#6 Status
Normal
Disabled
Not installed
Indicates the current memory status.
"Normal" indicates that the memory is
operating normally.
"Disabled" indicates that one or more
memory devices are defective.
Memory Retest [No]
Yes
Clears the error information on
memory.
Extended RAM
Step
1MB
1KB
Every Location
[Disabled]
"1MB" indicates that the memory test
is done in units of 1MB. "1KB"
indicates that the memory test is done
in units of 1KB. "Every-location"
indicates that every memory device is
tested. "Disabled" indicates that only
memory initialization is done.
[ ]: Factory-set
To Next Page
Loading...
