Configuring Your Server 4-23
Console Redirection
Select "Console Redirection" on the Server menu to display the following screen:
See the table below for the options and their descriptions:
Option Parameter Description Your Setting
BIOS Redirection
Port
[Disabled]
Serial Port B
Specify the serial port to which a
hardware console is connected.
ACPI Redirection
Port
[Disabled]
Serial Port B
Specify the serial port to which an
ACPI console is connected while the
operating system is running.
Baud Rate 9600
[19.2k]
57.6k
115.2k
Specify the baud rate used for the
interface with hardware consoles.
Flow Control None
XON/XOFF
[CTS/RTS]
CTS/RTS+CD
Specify the flow control method.
Terminal Type PC ANSI
[VT100+]
VT-UTF8
Specify the type of remote console.
Remote Console
Reset
[Disabled]
Enabled
Specify whether reset from the remote
console is enabled or disabled.
[ ]: Factory-set
To Next Page
Loading...
