NEC DS1000 Quick Setup Guide

Section 2: Customizing Features
2-8 ◆ Section 2: Customizing Features DS1000/2000 Quick Setup Guide
Part IV: To enable Caller ID Logging, assign the Caller ID Outbound Line/Group and the sys-
tem’s Home Area Code (HNPA).
To set up additional Caller ID Logging options, refer to the Caller ID Logging feature in the
Software Manual on the System Document CD that came with your system.
Setting up the Caller ID Outbound Line/Group
1. Enter the programming mode. You see:
2. Enter
1302 + HOLD. You see:
3. Enter the trunk number (1-6 in DS1000 or 1-64 in DS2000) or Trunk Group (90-98) +
HOLD.
4. Press CONF to exit program 1302.
Specify the System’
s Home Area Code
The is the area code in which the system is installed.
1. Enter the programming mode. You see:
2. Enter
1303 + HOLD. You see:
3. Dial
4 (I) + 9 (Y) to initialize the HNPA table. You see:
4. Dial
3 (E) + 2 (A) to enter the HNPA table edit mode. You see:
5. Enter your home area code (e.g., 203) +
HOLD. You see:
Your HNPA entry displays.
6. Press HOLD again, then CONF to exit program 1303.
USER: nnn
ENTER PROGRAM?
1302:CID DIALING
LINE/GROUP:
USER: nnn
ENTER PROGRAM?
1303:HNPA CODES
EDIT-E/INIT-I
1303:HNPA CODES
EDIT-E/INIT-I
1303:ADD CODES
DATA?
1303:HNPA TBL(?=CHK)
nnn

NEC DS1000 Specifications

General

Brand	NEC
Model	DS1000
Category	Telephone
Language	English