NEC DS1000 Quick Setup Guide

Section 2: Customizing Features
2-26 ◆ Section 2: Customizing Features DS1000/2000 Quick Setup Guide
6. Program the next consecutive key on the console.
OR
Press
CONF to go back to step 4 and select another key to program.
OR
Press
CONF twice to go back to step 3 and select another extension to program.
OR
Press
CONF three times to exit program 1701.
Feature Quick Steps
For more on these features, refer to the Software Manual on the System Document CD.
To use your line or loop key:
1. Press the trunk key.
To use your Park key:
1. Press Park key to Park or retrieve call.
To use your Hotline key:
1. Press key to call Hotline partner.
To use your Call Coverage key:
1. Press key to call covered extension or pick up ringing call.
You can set up the Call Coverage key for immediate ring, delayed ring, or no ring.
Group Pickup No Ring (lamp only)
10 + Pickup Group (1-16)
Group Pickup Delay Ring 11 + Pickup Group (1-16)
Page Zone 13 + Page Zone (0 for All Call, or zone 1-7)
System Speed Dial 14 + System Bin (200-299)
Personal Speed Dial 15 + Personal Bin (701-720)
Call Timer Key 16 + 1 for Manual Timer or 2 for Auto Timer
Voice Mail Record 17 + Mailbox number into which message will
be recorded (e.g., 304)
Night Mode
18 + CLEAR for System Mode System key
18 + UCD Master Number for System Mode
UCD Master key
Split
20
Intercom Directory Dialing
21
Reverse Voice Over 23+ Covered Extension (e.g., 304)
Message Center 24 + Message Center Extension
Save
25
Account Code Key
26
Call Forwarding
27
Headset Key
28
1
For more on these features, refer to the Software Manual on the System Document CD.
Feature
1
Key Code

NEC DS1000 Specifications

General

Brand	NEC
Model	DS1000
Category	Telephone
Language	English