NEC Dterm DTZ-8R-1 - Cordless Handset;Desk Phone Switch (Base Key Option)

Issue 1.0
2-6 About the D
term
Cordless DECT
4.3 Cordless Handset/Desk Phone Switch (Base Key Option)
It is possible to select between cordless handset operation and desk phone
operation using the cordless handset. To enable this feature, the Base Key
Option setting must be set to On. (Base Key Option is set to Off by default.)
To enter the Base Key Option setting:
1. Press the Mute/Menu key followed by 1, 2, 3, # on the numeric keypad.
2. Scroll down to the Base Key Option setting and select On.
3. With Base Key Option set to On, press the Center key. The Desk and H/S
soft keys should be displayed.
4. Select Desk for desk phone operation.
5. Select H/S for cordless handset operation.