Issue 1.0
4-2 D
term
Handset, Base Unit and Charging Unit
Handset Controls
Table 4-1 Handset Control Functions
Condition Action
Press HOLD on the front of the handset to place an existing call on hold.
Press CONF on the front of the handset to add a call to a conference.
Press TRANS on the front of the handset to transfer a call.
Press REDIAL on the front of the handset to dial the number that was
previously dialed.
Up to 32 digits
Press the Talk key to make a call. The telephone first acquires a
connection to the base.
Press the End Call key to end a call.
Press Mute/Menu key located on front of the handset, to mute a
conversation. Press this button again to resume the conversation. During
a conversation, this button is used to toggle the microphone function on
and off.
When the conversation ends, muting is turned off. In Standby mode,
press the Mute/Menu key to display the user menu window.
Press the Speaker key in Standby mode or during Talk mode to turn on
Handsfree Talk mode and talk handsfree.
For example, Press the Speaker key in Standby mode or Conversation
mode to turn on Handsfree Talk mode.
When the handset is in Handsfree Talk mode, the Handsfree icon displays
on the LCD of the handset.
During a conversation you can toggle back and forth between Talk mode
and Handsfree Talk mode, press the Speaker key for Handsfree Talk
mode or press the Talk key for Talk mode.
To Next Page
Loading...
