Issue 1.0
6-16 Setup and Operation
2.8 PBX No Service
When the base station is linked to a wired telephone and you press the TALK or
Speaker key, there is know acknowledgment from the PBX.
The handset goes into Standby mode and the LCD displays “ACQUIRING LINK”.
2.9 Out Of Range
When in Standby Mode
The handset displays the message “Searching” when the handset cannot find the
base station (Out of Range) in Standby mode.
The handset does not emit a tone when it goes into Standby mode.
To Next Page
Loading...
