Issue 1.0
5-2 Optional Equipment Installation
SECTION 2 INSTALLING THE OPTIONAL HEADSET
The optional headset provides a handsfree option for the D
term
Cordless DECT. With
the headset installed, the user can use the belt clip the carry the handset and
conduct a conversation using the headset. The second handset must be keyed to
operate with the base unit.
To install the headset:
Open the cover over the headset jack and plug the headset into the receptacle.
No other settings are needed. Operation of the headset is the same as the handset.
However, the user hears through the headset earphone and talks through the
headset microphone. The handset earphone and microphone (mouthpiece) are
disconnected.
Talk or Speaker key will be used to activate the headset.
Figure 5-2 Installing the Headset
To Next Page
Loading...
