Issue 1.0
7-20 Handset Feature Settings
3.5.4 Administrator Change Pin Code Settings
This setting allows the administrator to change the pin code.
To change the pin code:
1. Select Change Pin Code from the Administrator Setting List.
2. Press the Select key.
3. Change the pin code on the Change Pin Code screen.
4. Press OK to register the new pin code.
When this setting is selected, the handset
starts communicating with the base station
to obtain the pin code. The base station
sends the pin code to the handset and it is
displayed on the handset’s LCD.
Keys available when changing the pin code
include:
Delete key - deletes one digit.
Dial (0~9) key - numeric keys used to enter
the pin code.
OK key - sends the registration pin to the
base station. A confirmation tone is emitted.
To Next Page
Loading...
