Issue 1.0
Owner’s Manual 7-21
3.5.5 Administrator Site Survey Settings
This setting allows the administrator to initiate a site survey to collect
information about the handsets.
To change the pin code:
1. Select Site Survey from the Administrator Setting List.
2. Press the Select key.
3. On the Site Survey screen, press the Scan key. The results of the
scan are displayed on the handset’s LCD.
Scan for information:
This screen displays the following
information:
Band - the carrier band for the handset.
Condition - Good / Fair / Poor
Clear Slot - number of clear slots (total
number of slots is 12).
Number of Base - the number of the base
station.
Keys available when requesting a site
survey include:
Scan key - begins scanning for clear slots
and the number of the associated base
station.
Sync key - begins Sync display mode.
Scanning begins collecting information (this
takes about 30 seconds).
To Next Page
Loading...
