NEC Dterm DTZ-8R-1 - Administrator Site Survey Settings - Sync Display Mode

Issue 1.0
7-22 Handset Feature Settings
3.5.6 Administrator Site Survey Settings - Sync Display Mode
To start Sync Display mode:
Press the Sync key.
Scan complete; information displayed:
The results of the scan are displayed in the
LCD.
Band - the carrier band for the handset.
Condition - Good / Fair / Poor
Clear Slot - number of clear slots (total
number of slots is 12).
Number of Base - the number of the base
station.
Keys available when requesting a site
survey include:
Scan key - restarts scanning for clear slots
and number of base stations.
Sync key - begins Sync Display mode.
Start Sync Display mode:
When the Sync key is pressed, the Sync
Display mode displays the following
information:
Ch - the current channel number.
Slot - the current slot number.
RSSI - the current RSSI (Receive Signal
Strength Indication) value.
BER - the Bit Error Rate.
RFPI - the RFPI (Radio Fixed Part Identity)
or base station ID.
H/O - Hand Over Enable/Disable
Lost - Lost counter
L - status (locked or unlocked)