NEC Dterm DTZ-8R-1 - Wall Installation; Mounting the Base Directly to the Wall

Issue 1.0
3-4 Installation
SECTION 5 WALL INSTALLATION
5.1 Mounting the Base Directly to the Wall
Before mounting the telephone, consider the following:
 Select a location away from electrical cables, pipes, or other items behind the
mounting location that could cause a hazard when inserting screws into the
wall.
 The location must be near a 120Vac power outlet so that the AC power adapter
can reach.
 Also consider proximity to the PBX (key system) so that the telephone line cord
will not be excessively long.
 Make sure the wall material is capable of supporting the weight of the base unit.
 Use #10 screws with anchoring devices suitable for the wall material where the
base unit will be placed.
To mount the telephone:
1. Insert two mounting screws 3-15/16” apart. Allow 3/16” between the
wall and screw heads for mounting the telephone.
IMPORTANT
The DTZ-8R-1 does not support wall plate mounting.
Figure 3-3 Inserting Screws into the Wall for Wall Mounting the Telephone