NEC Dterm DTZ-8R-1 - Brightness Settings; Power Save Settings

Issue 1.0
Owner’s Manual 7-9
3.2.3 Brightness Settings
3.2.4 Power Save Settings
While in Standby or Talk mode, one minute elapses (without pressing any
keys) and the phone enters Power Save mode.
To exit Power Save mode:
1. Press any key.
- OR -
Remove the handset from the charger unit.
Keys available for brightness settings
include:
 Default = MAX.
MAX = 100%
HIGH = 80%
MID = 60%
LOW = 20%
To select settings:
up (
▲) / down (▼) - accesses the next
setting in the list (forward/backward).
Select key - stores the selected timeout
value, emits a confirmation tone and returns
to the previous settings screen.
Keys available for power save settings
include:
 Default = On.
On = LCD is in sleep mode, the LCD back
light is off
Off = LCD back light is dimly lighted
To select settings:
up (
▲) / down (▼) - accesses the next
setting in the list (forward/backward).
Select key - selects the desired setting and
stores the selection. A confirmation tone is
emitted. The previous screen (setting list) is
displayed.